Single Mode SFP Modules for Longer Links
Single-mode SFP modules use a narrow fibre core and a laser source to carry signals over longer distances than multimode modules, and this category page gathers the single-mode SFP line supplied here. The product pages behind this category are the 1.25G bidirectional module and the 10G compatible module, both listed on single-mode fibre.
What this page covers
This page is a category page for single-mode SFP modules. It gathers the models and guidance that belong to this line in one place, and it links to the individual product pages where a model has a listed specification. Lines that have only a title-level mention, with no detailed specification behind them, are described here at category level only and are not given a product page, because a product page without a listed specification would be guessing.
The distinction matters for buying. A category page answers which line a need belongs to and what to ask about; a product page answers the listed figures for one model. If you arrive here looking for a figure for a specific model, follow the link to that model page, and if no model page is linked, the figure is not published on this site and should be asked for in the enquiry rather than inferred from a neighbouring model.
How to specify this line
A usable enquiry for single-mode SFP modules starts with the rate, the wavelength, the fibre type and the distance, because those four items decide whether a module fits the link at all. The connector and the form factor come next, followed by the operating temperature range and whether digital diagnostics are required. Buyers who send only a rate, or only a model-style name, usually need a second round of questions before a quotation can be confirmed, so including the full set in the first message saves a cycle.
Distance figures deserve special care. A distance quoted for one fibre type does not transfer to another, and a distance quoted for one wavelength does not transfer to a different wavelength. On this site every distance is tied to the fibre and wavelength it was listed with, and where the source pages disagree the conflict is flagged on the page. If a distance matters for your link, name the fibre you will actually install and ask for the figure to be confirmed against that fibre before ordering.
What to confirm before ordering
Before an order is placed, confirm the model, the rate, the wavelength, the distance, the connector and the quantity in writing, and confirm any certification document you need by name. Minimum order quantity and lead time are unavailable at company level on this site, so ask for both per model in the enquiry rather than assuming a company-wide term. Quotations are confirmed per order, and specifications are confirmed per model before payment.
Compatibility is a separate check from the optical figures. A module that matches on rate and wavelength can still fail on a host platform that does not accept it, so name the host platform in the enquiry when compatibility matters. Where this site states a compatibility position, it states the source of that position, and it does not extend a compatibility statement from one model to another. If the platform is not named, compatibility cannot be confirmed from this page alone.
Where single-mode SFP fits
Single-mode SFP modules fit campus, metro-access and inter-building links where multimode distance limits are too short, and they fit single-fibre bidirectional links where only one fibre strand is available. The bidirectional module pairs two wavelengths on one strand, which is why its page lists a wavelength pair rather than a single wavelength. The 10G module is a conventional dual-fibre single-mode module at 1310nm over 10km.
Single-mode distance figures are not interchangeable between wavelengths or between module families. A 10km figure at one wavelength does not imply 10km at another, and a 25km bidirectional figure does not imply 25km for a dual-fibre module. Each product page ties its distance to its own wavelength and fibre, and an enquiry should name the fibre that will actually be installed.
Models on this page
BIDI 1.25G SFP Module
1.25G bidirectional SFP over up to 25km on single-mode fibre.
SFP 10G LR Module
10G single-mode SFP compatible module at 1310nm over 10km.
Enquiry checklist
Before sending an enquiry, note the model or the rate you need, the wavelength, the fibre type, the distance, the connector, the quantity and the application. State whether the module must be compatible with a named host platform, and name any certification document you need. Minimum order quantity and lead time are unavailable at company level and are confirmed per model in the enquiry. Quotations are confirmed per order.
Send an enquiry | Sales contact: Ms. Vicky Tian, Sales Manager, +86 19860146913 | Telephone: 86-0755-82552969 | Email: [email protected]
Frequently asked questions
How do I get a quotation?
Send an enquiry naming the model, the rate, the wavelength, the distance and the quantity you need, plus the application. Quotations are confirmed per order, and specifications are confirmed per model before payment. This site does not list fixed selling figures, and no price is shown for any model.
What certification documents can you provide?
The company states ISO 9001, CE, FC, 3C and RoHS names. Certificates are available upon request. If a buyer needs a certificate for a specific model, name the model in the enquiry so the correct document can be checked. No certificate numbers are published on this site.
Do the specifications on one page apply to the whole range?
No. Specifications are shown per model and must not be read across the whole range. Where a value is not listed for a model, the page says to confirm per model rather than filling in a generic figure, and where the source pages disagree, the page flags the conflict instead of choosing one value as fact.
What are the minimum order quantity and lead time?
At company level both are unavailable on this site and are confirmed per model in the enquiry. A single-model note, where one exists, is marked as applying to that model only and must not be read as a company-wide term.